Whether your air conditioner is leaking or you’re having trouble operating it, evaporative cooler repair can be a good option for your home. Rather than dealing with the hassle of buying a new unit, you can have a professional repair service fix the problem and make sure everything works as it should.

When you use evaporative coolers, it is essential to keep them clean. A dirty water tank is not only unsanitary, but it can also cause mold and algae growth. Having a professional repair service do a clean up every couple of months will help prevent these problems from occurring.

If you’re experiencing trouble with your evaporative cooler, you should first check to see if you have a tripped breaker. This is a common problem with evaporative coolers. It can be caused by loose wires or corroded parts in the system. When a tripped breaker is not fixed, it could mean that the unit is about to break.

It is also a good idea to check to see if you have a fishy or swampy odor coming from the cooler. This might be due to mold growing in the pads. This can be remedied by removing the pads, cleaning them, and installing new ones.

Another thing you should do is change the pads on your cooler. This evaporative cooler repair will help the system operate more efficiently and make the unit safer. You can also replace the belts on your cooler if they are worn. A replacement belt can cost about $5 to $10. If your system uses a water pump, you might need to replace it. If you’re unsure about which part to buy, you can ask a technician.

In addition to these steps, you should be careful when storing your cooler for the winter. Leave the cooler in a cool, dry place, but don’t keep it in a warm area. You should also be sure to protect your furniture and woodwork with extra moisture. This can help prevent mold and mildew from developing. If you store your evaporative cooler during the winter, you’ll need to have it repaired as soon as you’re ready to use it again.

If your evaporative cooler is not cooling, you may have low water levels or a clogged filter. If you have a clogged filter, the technician will be able to clear it up. Depending on the type of evaporative cooler you own, you might need to install a new pump. If you have a larger system, you might need to replace the entire unit.

You should also be sure to change your cooling pads twice a year. When you’re replacing the pads, you should also be sure to check to see if they have any bacteria or mold growing on them. You can check them by wiping them down with a cloth. You should also tighten any connections and make sure the fan belt is at the right tension.

In addition to these steps, you might need to have the motor and pump replaced. These components can be expensive, and they can be a lot more energy efficient when they’re replaced.